# Changing WBM Settings with Codesys Programatically

**URL:** <https://www.wago.community/t/changing-wbm-settings-with-codesys-programatically/1410>\
**Category:** CODESYS\
**Tags:** pfc200, pfc100, edge-controller, codesys, cc100\
**Created:** [December 9, 2024, 5:47pm UTC](https://www.wago.community/t/changing-wbm-settings-with-codesys-programatically/1410 "2024-12-09T17:47:10Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![WagoKurt](https://sea2.discourse-cdn.com/flex016/user_avatar/www.wago.community/wagokurt/32/11_2.png) [@WagoKurt](https://www.wago.community/u/WagoKurt)\
**Post date:** [December 9, 2024, 5:47pm UTC](https://www.wago.community/t/changing-wbm-settings-with-codesys-programatically/1410/1 "2024-12-09T17:47:10Z")

</div>

It is sometimes necessary to change device settings programmatically. For example, you would like the HMI to be able to change the PLC IP Address, or set the TimeZone. This can be done using the Codesys library WagoAppConfigTool. See screenshot below.

 ![configtool](https://us1.discourse-cdn.com/flex016/uploads/wago/original/2X/a/a528914bcb0caf859e2e0e374403ccc0755d0dee.jpeg)

---

<div class="post-metadata">

**Author:** ![TomasD](https://sea2.discourse-cdn.com/flex016/user_avatar/www.wago.community/tomasd/32/2042_2.png) [@TomasD](https://www.wago.community/u/TomasD)\
**Post date:** [December 10, 2024, 2:50pm UTC](https://www.wago.community/t/changing-wbm-settings-with-codesys-programatically/1410/2 "2024-12-10T14:50:41Z")

</div>

How is this method different from the PLC web page method (\*/wbm/)?

---

<div class="post-metadata">

**Author:** ![WagoDamRud](https://sea2.discourse-cdn.com/flex016/user_avatar/www.wago.community/wagodamrud/32/258_2.png) [@WagoDamRud](https://www.wago.community/u/WagoDamRud)\
**Post date:** [December 13, 2024, 1:06pm UTC](https://www.wago.community/t/changing-wbm-settings-with-codesys-programatically/1410/3 "2024-12-13T13:06:37Z")

</div>

There is no difference, because both methods use the same scripts from **/etc/config-tools**. In WBM, they are called by PHP
