# CoDeSys Control for Linux SL **URL:** \ **Category:** Hardware and Linux\ **Tags:** linux, codesys\ **Created:** [June 25, 2024, 10:28am UTC](https://www.wago.community/t/codesys-control-for-linux-sl/1054 "2024-06-25T10:28:33Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![bjornidar](https://avatars.discourse-cdn.com/v4/letter/b/5fc32e/32.png) [@bjornidar](https://www.wago.community/u/bjornidar)\ **Post date:** [June 25, 2024, 10:28am UTC](https://www.wago.community/t/codesys-control-for-linux-sl/1054/1 "2024-06-25T10:28:34Z")
Hi, has anyone any experience running CoDeSys runtime on a Linux computer? I’m about to start a project where the HMI part will be quite large, so I was thinking of running the PLC part on a EdgeController and the HMI part on a Linux-computer. ---
**Author:** ![PatrickR](https://sea2.discourse-cdn.com/flex016/user_avatar/www.wago.community/patrickr/32/262_2.png) [@PatrickR](https://www.wago.community/u/PatrickR)\ **Post date:** [June 25, 2024, 3:20pm UTC](https://www.wago.community/t/codesys-control-for-linux-sl/1054/2 "2024-06-25T15:20:58Z")
not really … but maybe someone else? Have you already had a look at HMI SL? > **[CODESYS HMI SL](https://store.codesys.com/en/codesys-hmi-sl-bundle.html)** > > This product allows for the creation of operating interfaces with CODESYS visualization for an HMI device (PC or panel), with data from CODESYS V2, CODESYS V3 and OPC UA controllers. The visualization is created with the CODESYS Development System... ---
**Author:** ![jgovek](https://avatars.discourse-cdn.com/v4/letter/j/f08c70/32.png) [@jgovek](https://www.wago.community/u/jgovek)\ **Post date:** [September 30, 2024, 10:52pm UTC](https://www.wago.community/t/codesys-control-for-linux-sl/1054/3 "2024-09-30T22:52:06Z")
[How To: CODESYS Control for Linux SL Installation on Edge Computer - Hardware and Linux - WAGO Open Source Community](https://www.wago.community/t/how-to-codesys-control-for-linux-sl-installation-on-edge-computer/1230)