# Couldnt Scan Ethernet I/P device after adding EDS file

**URL:** <https://www.wago.community/t/couldnt-scan-ethernet-i-p-device-after-adding-eds-file/1224>\
**Category:** CODESYS\
**Tags:** how-to, edge-controller, codesys\
**Created:** [September 26, 2024, 6:01am UTC](https://www.wago.community/t/couldnt-scan-ethernet-i-p-device-after-adding-eds-file/1224 "2024-09-26T06:01:33Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![umairyamin](https://avatars.discourse-cdn.com/v4/letter/u/dec6dc/32.png) [@umairyamin](https://www.wago.community/u/umairyamin)\
**Post date:** [September 26, 2024, 6:01am UTC](https://www.wago.community/t/couldnt-scan-ethernet-i-p-device-after-adding-eds-file/1224/1 "2024-09-26T06:01:33Z")

</div>

Hi all,

im currently uploaded EDS file for sensor named “Dx1000” and “LK-G5000”. Both sensors appear when i try to add device as shown below.

 ![image](https://us1.discourse-cdn.com/flex016/uploads/wago/original/1X/fafb1f0dc19ee1a463f3b3790e9d56a976d2c3b9.png)

But when i try to scan devices, only “LK-G5000” appeared. Can anyone tell me why? Because currently couldnt get any value from “Dx1000”.

 ![image](https://us1.discourse-cdn.com/flex016/uploads/wago/original/1X/cbace5e586b3db50e20c21f2f446b72942402516.png)

When i run the code, the status shows “Not running”. Is there anything that i can do? Thank you in advance.

 ![image](https://us1.discourse-cdn.com/flex016/uploads/wago/original/1X/b6da4b760755e22798863d37ea20c4f86b8a7a1d.png)

Best regards,  
Umair