# Datalogger 2.3.0 with no configuration file

**URL:** <https://www.wago.community/t/datalogger-2-3-0-with-no-configuration-file/2106>\
**Category:** Hardware and Linux\
**Created:** [July 24, 2025, 12:13pm UTC](https://www.wago.community/t/datalogger-2-3-0-with-no-configuration-file/2106 "2025-07-24T12:13:34Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![gjiorg](https://sea2.discourse-cdn.com/flex016/user_avatar/www.wago.community/gjiorg/32/1575_2.png) [@gjiorg](https://www.wago.community/u/gjiorg)\
**Post date:** [July 24, 2025, 12:13pm UTC](https://www.wago.community/t/datalogger-2-3-0-with-no-configuration-file/2106/1 "2025-07-24T12:13:34Z")

</div>

Hi there,  
I am trying to use the Datalogger app (WAGO Visualization Datalogger 2.3.0),  
I have a PFC300 PLC and I installed the IPK file through the WBM (install-wago-sysapp-dataplotter\_2.3.0\_arm64).  
In codesys, I have used only this: WagoAppDatalogger.FbDatalogger and I can see that I have the CSV files on the SD card with the DataPlotter format (and the file is updated every 20 minutes).  
The CSV files are on path: /media/docker/CSV\_Files (and sd is mounted on the correct directory) with name Logfile\_dp\_2025\_07.csv  
On path /home/codesys\_root/PlcLogic/config/datalogger-visu  
I have 2 JSON files, and I made some edits to the one with the name datalogger-visu.json  
But something I am missing, and when I visit the [http://PFC300-IP/datalogger-visu/](http://PFC300-IP/datalogger-visu/)  
I receive the error: ‘No configuration file,’ and I can’t see the values.  
I am missing a step, because when I use the demo program on another PLC, the datalogger app works as expected.  
Is there somebody who can help?  
Thank you
