# Display one webvisu inside another webvisu? **URL:** \ **Category:** CODESYS\ **Created:** [June 17, 2022, 9:45pm UTC](https://www.wago.community/t/display-one-webvisu-inside-another-webvisu/125 "2022-06-17T21:45:36Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![wagojesse](https://sea2.discourse-cdn.com/flex016/user_avatar/www.wago.community/wagojesse/32/8_2.png) [@wagojesse](https://www.wago.community/u/wagojesse)\ **Post date:** [June 17, 2022, 9:45pm UTC](https://www.wago.community/t/display-one-webvisu-inside-another-webvisu/125/1 "2022-06-17T21:45:36Z")
Is it possible to embed one controller’s webvisu into the webvisu or target visualization of another controller? I would like to pool visualizations in some sort of tile configuration. ---
**Author:** ![wagojesse](https://sea2.discourse-cdn.com/flex016/user_avatar/www.wago.community/wagojesse/32/8_2.png) [@wagojesse](https://www.wago.community/u/wagojesse)\ **Post date:** [June 17, 2022, 9:46pm UTC](https://www.wago.community/t/display-one-webvisu-inside-another-webvisu/125/2 "2022-06-17T21:46:03Z")
apparently it is: In order to display one webvisu (following named Target) in another webvisu (following namend Master) the following steps must be taken: 1. Go to the Target and Master WBM and open the same http/https ports in Ports and Services (Best practice: Open just http or https) 2. Log in to the Target using FTP (e.g. WinSCP, name: root, password: wago) and navigate to the folder /etc/lighttpd 3. a) Open the files “mode\_http.conf”, “mode\_http+https.conf” and “mode\_https.conf” and remove the line setenv.add-response-header += (“X-Frame-Options” =\> “SAMEORIGIN”) This will allow anyone to display the visu in a frame b) (just if needed) Change the line to setenv.add-response-header += (“X-Frame-Options” =\> “SAMEORIGIN”) to "ALLOW\_FROM _insert ip adress of pc_ " to allow acces with frames from this PC. 4. Restart the Target 5. In the Master webvisu call the Target in the webbrowser element with http:// or https:// according to 1) 6. Call the Master webvisu in the browser with http:// or https:// according to 1) ---
**Author:** ![quenorha](https://sea2.discourse-cdn.com/flex016/user_avatar/www.wago.community/quenorha/32/429_2.png) [@quenorha](https://www.wago.community/u/quenorha)\ **Post date:** [June 20, 2022, 5:30am UTC](https://www.wago.community/t/display-one-webvisu-inside-another-webvisu/125/3 "2022-06-20T05:30:51Z")
This is the same workflow if you want to embed the visualization in a Grafana Text Panel. You need also to set the parameter “-e GF\_PANELS\_DISABLE\_SANITIZE\_HTML=true” when creating the Grafana container. ---
**Author:** ![j.lee](https://avatars.discourse-cdn.com/v4/letter/j/db5fbb/32.png) [@j.lee](https://www.wago.community/u/j.lee)\ **Post date:** [September 17, 2024, 9:10am UTC](https://www.wago.community/t/display-one-webvisu-inside-another-webvisu/125/4 "2024-09-17T09:10:05Z")
Hi, I have tried this way. However, I do not have the “setenv.add-response-header += (“X-Frame-Options” =\> “SAMEORIGIN”)” in my target. Instead, it is “setenv.add-response-header += (“Strict-Transport-Security” =\> “max-age=15768000”)”. I am using PFC200. I am trying to use this method to help me with displaying IP camera feed within webvisu web browser element. Unfortunately, it can’t display any URL/Website other than its own WBM. So, I am struggling it looks like the web browser element does not work properly so I can’t access to the IP camera as well. ---
**Author:** ![Ragren](https://avatars.discourse-cdn.com/v4/letter/r/71e660/32.png) [@Ragren](https://www.wago.community/u/Ragren)\ **Post date:** [June 17, 2026, 5:04pm UTC](https://www.wago.community/t/display-one-webvisu-inside-another-webvisu/125/5 "2026-06-17T17:04:15Z")
Late reply but you can find the line in here now: /etc/lighttpd/apps.confd/webvisu.conf