# Import of Phoenix PLCNext source code

**URL:** <https://www.wago.community/t/import-of-phoenix-plcnext-source-code/2016>\
**Category:** CODESYS\
**Created:** [June 30, 2025, 12:02pm UTC](https://www.wago.community/t/import-of-phoenix-plcnext-source-code/2016 "2025-06-30T12:02:19Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Simon](https://avatars.discourse-cdn.com/v4/letter/s/f07891/32.png) [@Simon](https://www.wago.community/u/Simon)\
**Post date:** [June 30, 2025, 12:02pm UTC](https://www.wago.community/t/import-of-phoenix-plcnext-source-code/2016/1 "2025-06-30T12:02:19Z")

</div>

We are trying to import code from PLCNext from Phoenix to CODESYS V3.5.19.7 Both CODESYS and PLCNext supports PLCOPEN export/import, but so far I get some error messages. There seem to be some differences in the format.

Does anyone have experience with importing code from PLCNEXT using this technique or another way?

 ![image](https://us1.discourse-cdn.com/flex016/uploads/wago/original/2X/a/ae0b1ee3eb9c62d055b52f0e3a92344d36cf22b3.png)

---

<div class="post-metadata">

**Author:** ![WagoIcard](https://sea2.discourse-cdn.com/flex016/user_avatar/www.wago.community/wagoicard/32/1508_2.png) [@WagoIcard](https://www.wago.community/u/WagoIcard)\
**Post date:** [July 7, 2025, 5:35am UTC](https://www.wago.community/t/import-of-phoenix-plcnext-source-code/2016/2 "2025-07-07T05:35:09Z")

</div>

Yes, I think this export import use the IEC 61131-10.  
This will be enabled in codesys 3.5.21.10 with FW29 (PFC100/200) release soon. or FW30 (release around september).

If you really urgently need to use those import/export, install codesys 3.5.21.10 and enable the IEC 61131-10 export/import function. then use the normal codesys import/export to work with it.