# Need Target files (.trg) and .WDD file for WAGO 750-893 (CODESYS 2.3 & I/O-Check)
**URL:** https://www.wago.community/t/need-target-files-trg-and-wdd-file-for-wago-750-893-codesys-2-3-i-o-check/2818
**Category:** CODESYS
**Created:** [July 16, 2026, 3:05am UTC](https://www.wago.community/t/need-target-files-trg-and-wdd-file-for-wago-750-893-codesys-2-3-i-o-check/2818 "2026-07-16T03:05:02Z")
**Posts on this page:** 2
**Page:** 1
### Author:  [@Paul1](https://www.wago.community/u/Paul1)
#### Post date: [July 16, 2026, 3:05am UTC](https://www.wago.community/t/need-target-files-trg-and-wdd-file-for-wago-750-893-codesys-2-3-i-o-check/2818/1 "2026-07-16T03:05:02Z")
Hello everyone,
> I am setting up a new engineering laptop and I need to connect to a **WAGO 750-893** controller using **CODESYS V2.3** and **WAGO I/O-Check 3**.
>
> Unfortunately, I am unable to find the legacy target files on the WAGO Download Center. I tried downloading the “Device Description CODESYS 2” package, but it only contains files for newer devices like PFC100, PFC300, CC100, etc., and lacks the support for the classic 750 series.
>
> Could anyone please share or point me to the download link for:
>
> 1. The **Target files (`.trg` / `.tnf`)** for the **750-893** (for CODESYS 2.3).
>
> 2. The **Device Description file (`07500893.wdd`)** for WAGO I/O-Check 3.
>
> Any help would be highly appreciated. Thank you in advance!
>
> Best regards.
---
### Author:  [@AdamReeve](https://www.wago.community/u/AdamReeve)
#### Post date: [July 20, 2026, 12:24pm UTC](https://www.wago.community/t/need-target-files-trg-and-wdd-file-for-wago-750-893-codesys-2-3-i-o-check/2818/2 "2026-07-20T12:24:15Z")
Please contact your local WAGO sales office for support. We are not allowed to post links to the old Codesys 2.3 files nor WAGO-IO-Check here because these were/are licensed software packages.