# Node-Red Ladder Logic Nodes

**URL:** <https://www.wago.community/t/node-red-ladder-logic-nodes/645>\
**Category:** Node-RED\
**Created:** [October 24, 2023, 10:20am UTC](https://www.wago.community/t/node-red-ladder-logic-nodes/645 "2023-10-24T10:20:46Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![iiot2k](https://avatars.discourse-cdn.com/v4/letter/i/8baadc/32.png) [@iiot2k](https://www.wago.community/u/iiot2k)\
**Post date:** [October 24, 2023, 10:20am UTC](https://www.wago.community/t/node-red-ladder-logic-nodes/645/1 "2023-10-24T10:20:46Z")

</div>

Hello Wago fans,  
I have developed Node-Red Nodes with which you can implement control tasks in Node-Red.

> **[GitHub - redplc/redplc: redPlc Node-Red nodes for the realization of...](https://github.com/redplc/redplc)**
>
> redPlc Node-Red nodes for the realization of Software-PLC with Ladder-Logic - GitHub - redplc/redplc: redPlc Node-Red nodes for the realization of Software-PLC with Ladder-Logic

Currently the module node implemented for the Wago Controller CC100.

> **[GitHub - redplc/cc100: Notes about Wago Controller CC100](https://github.com/redplc/cc100)**
>
> Notes about Wago Controller CC100. Contribute to redplc/cc100 development by creating an account on GitHub.

Of course, this is a very complex topic.  
If you find any errors, please let me know.  
You are also welcome to make suggestions.

---

<div class="post-metadata">

**Author:** ![iiot2k](https://avatars.discourse-cdn.com/v4/letter/i/8baadc/32.png) [@iiot2k](https://www.wago.community/u/iiot2k)\
**Post date:** [October 27, 2023, 11:18am UTC](https://www.wago.community/t/node-red-ladder-logic-nodes/645/2 "2023-10-27T11:18:53Z")

</div>

I updated the notes about Wago Controller CC100.

> **[GitHub - redplc/cc100: Notes about Wago Controller CC100](https://github.com/redplc/cc100)**
>
> Notes about Wago Controller CC100. Contribute to redplc/cc100 development by creating an account on GitHub.

Added to this is the installation of Node-Red on the SD card.  
Unfortunately I didn’t have time to test it due to my projects.  
Could someone test this and post the results here?  
If it doesn’t work, I will delete the entry.  
Thank you.