# PLC Watchdog error lost communication during power OFF & ON

**URL:** <https://www.wago.community/t/plc-watchdog-error-lost-communication-during-power-off-on/2749>\
**Category:** Hardware and Linux\
**Created:** [June 5, 2026, 1:57pm UTC](https://www.wago.community/t/plc-watchdog-error-lost-communication-during-power-off-on/2749 "2026-06-05T13:57:30Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Sanjaykathiravan1](https://avatars.discourse-cdn.com/v4/letter/s/4af34b/32.png) [@Sanjaykathiravan1](https://www.wago.community/u/Sanjaykathiravan1)\
**Post date:** [June 5, 2026, 1:57pm UTC](https://www.wago.community/t/plc-watchdog-error-lost-communication-during-power-off-on/2749/1 "2026-06-05T13:57:30Z")

</div>

Hello Everyone,

I am using WAGO 750-8212 PLC with beijer HMI X2 pro. I lost communication in 2 way one is through power on and another time during machine running which is sometime only. I tried with increasing scan cycle and all nothing helps. If I turned off the machine and then turned on again then i have this issue and again i turned off plc and turned ON again PLC meanwhile switch off HMI and ON again then this issue diappear. When this issue happened i have the problem in PLC called Watchdog time of the local bus has expired.Also I want to mention when the issue happened there was version mismatch between PLC V4 and HMI V5.

 ![IMG_9456](https://us1.discourse-cdn.com/flex016/uploads/wago/original/2X/1/15305b2e453ec3b1ba001ea973d2c65ac6348022.jpeg)
