# Qt application on TP600

**URL:** <https://www.wago.community/t/qt-application-on-tp600/356>\
**Category:** Hardware and Linux\
**Created:** [January 4, 2023, 2:57pm UTC](https://www.wago.community/t/qt-application-on-tp600/356 "2023-01-04T14:57:32Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![WagoDamRud](https://sea2.discourse-cdn.com/flex016/user_avatar/www.wago.community/wagodamrud/32/258_2.png) [@WagoDamRud](https://www.wago.community/u/WagoDamRud)\
**Post date:** [January 4, 2023, 2:57pm UTC](https://www.wago.community/t/qt-application-on-tp600/356/1 "2023-01-04T14:57:32Z")

</div>

Hello,

is it possible to run Qt application on TP600? Does anyone have any experience on this topic?

Best regards,  
~Damian

---

<div class="post-metadata">

**Author:** ![WagoGrim](https://sea2.discourse-cdn.com/flex016/user_avatar/www.wago.community/wagogrim/32/60_2.png) [@WagoGrim](https://www.wago.community/u/WagoGrim)\
**Post date:** [January 5, 2023, 11:48am UTC](https://www.wago.community/t/qt-application-on-tp600/356/2 "2023-01-05T11:48:37Z")

</div>

Yes this should be possible.  
Please look at this and give feedback on whats going on with the project!

> <https://github.com/WAGO/pfc-howtos/pull/7>
>
> This HowTo explains how to build Qt from source for the embedded Linux Device PF…CXXXX.
> It also explains how to integrate the Sysroot and Toolchain in a similar way to "HowTo\_UtilizeEclipseCDT" but also adds the huge Qt Library to the available Libaries.
> 
> After the succesful build you will be able to compile/deploy/debug the Application without the need of ptxdist.
> 
> PS: Feel free to change/edit the Documentation to you standards if needed.

---

<div class="post-metadata">

**Author:** ![WagoDamRud](https://sea2.discourse-cdn.com/flex016/user_avatar/www.wago.community/wagodamrud/32/258_2.png) [@WagoDamRud](https://www.wago.community/u/WagoDamRud)\
**Post date:** [January 5, 2023, 12:30pm UTC](https://www.wago.community/t/qt-application-on-tp600/356/3 "2023-01-05T12:30:47Z")

</div>

Thanks Thorgrim! I didn’t check the pull requests. It’s a good starting point, but what I would like to achieve is disable _webenginebrowser_ and runtime and replace visu with Qt Quick application.

I will try to find out how to do this, I will update the topic, but if someone has some other ideas, don’t hesitate to write 🙂