# Reboot infini PFC200

**URL:** <https://www.wago.community/t/reboot-infini-pfc200/2740>\
**Category:** Hardware and Linux\
**Created:** [May 29, 2026, 8:51am UTC](https://www.wago.community/t/reboot-infini-pfc200/2740 "2026-05-29T08:51:06Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![benoitS](https://avatars.discourse-cdn.com/v4/letter/b/898d66/32.png) [@benoitS](https://www.wago.community/u/benoitS)\
**Post date:** [May 29, 2026, 8:51am UTC](https://www.wago.community/t/reboot-infini-pfc200/2740/1 "2026-05-29T08:51:06Z")

</div>

Hello.

As a complete beginner with PLCs, I managed to brick my PFC200.

I tried setting up a VPN connection with OpenVPN without success, and then with ZeroTier, which worked. After I performed a voluntary power reset, the PFC keeps rebooting endlessly!!!

I tried the factory reset by pressing the RST button and setting the switch to reset, but all LEDs remain off except for U7, which is fixed red…

Thanks for your help!!!

Benoit

---

<div class="post-metadata">

**Author:** ![WagoJan](https://avatars.discourse-cdn.com/v4/letter/w/4bbf92/32.png) [@WagoJan](https://www.wago.community/u/WagoJan)\
**Post date:** [May 29, 2026, 10:37am UTC](https://www.wago.community/t/reboot-infini-pfc200/2740/2 "2026-05-29T10:37:30Z")

</div>

Hello BenoitS

If you have a SD Card, try flashing a firmware to the controller.

When you download a firmware from our downloadcenter, it includes a .img file that you can load onto a SD card via example Win32DiskImager

Best Regards Jan

---

<div class="post-metadata">

**Author:** ![benoitS](https://avatars.discourse-cdn.com/v4/letter/b/898d66/32.png) [@benoitS](https://www.wago.community/u/benoitS)\
**Post date:** [May 29, 2026, 10:48am UTC](https://www.wago.community/t/reboot-infini-pfc200/2740/3 "2026-05-29T10:48:01Z")

</div>

Indeed, reloading the firmware with the SD card worked!

Thank you.