# Restarting the PFC200 application if it crashes

**URL:** <https://www.wago.community/t/restarting-the-pfc200-application-if-it-crashes/1582>\
**Category:** Hardware and Linux\
**Tags:** pfc200, linux\
**Created:** [February 13, 2025, 3:44pm UTC](https://www.wago.community/t/restarting-the-pfc200-application-if-it-crashes/1582 "2025-02-13T15:44:57Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![AdamReeve](https://sea2.discourse-cdn.com/flex016/user_avatar/www.wago.community/adamreeve/32/59_2.png) [@AdamReeve](https://www.wago.community/u/AdamReeve)\
**Post date:** [April 28, 2025, 12:47pm UTC](https://www.wago.community/t/restarting-the-pfc200-application-if-it-crashes/1582/4 "2025-04-28T12:47:44Z")

</div>

I just posted a HowTo that is quite similar to this. Take a look and see if it may help you:

> [@HowTo: Monitor CODESYS runtime process and restart](https://www.wago.community/t/howto-monitor-codesys-runtime-process-and-restart/1802):
>
> This guide was made for specific application, but it may be useful as a starting point for others. It monitors both the CODESYS runtime process and a PFC RUN led and will attempt to restart the stored bootproject if possible. [How To Monitor CODESYS runtime process and restart.docx](https://www.wago.community/uploads/short-url/pZGERK7L8V420HGztTGHVIme9lb.docx) (90.1 KB)

---

_[View the full topic](https://www.wago.community/t/restarting-the-pfc200-application-if-it-crashes/1582)._