# Terminal Specific Control Mode Fails on PFC300-8302 With DALI-configurator 4

**URL:** <https://www.wago.community/t/terminal-specific-control-mode-fails-on-pfc300-8302-with-dali-configurator-4/1893>\
**Category:** Hardware and Linux\
**Tags:** pfc300\
**Created:** [May 30, 2025, 4:00pm UTC](https://www.wago.community/t/terminal-specific-control-mode-fails-on-pfc300-8302-with-dali-configurator-4/1893 "2025-05-30T16:00:04Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Faerch](https://avatars.discourse-cdn.com/v4/letter/f/8e7dd6/32.png) [@Faerch](https://www.wago.community/u/Faerch)\
**Post date:** [May 30, 2025, 4:00pm UTC](https://www.wago.community/t/terminal-specific-control-mode-fails-on-pfc300-8302-with-dali-configurator-4/1893/1 "2025-05-30T16:00:05Z")

</div>

Hello, I have a problem with my brand new PFC-300-8302, what i normal can do in the PFC200-8212, is for me impossible with this one. The thing is, when in Codesys have made a project, added the DALI 753-647 Kbus DALI module, setup all runtime, everything is fine, in RUN mode, when i am entering the DALI-configurator in “codesys mode” then i can connect, but nothing happens, either Addressing, Compare,Query diagnostic. Im used to be able to do this in the older PFC200. When i set the PFC300 in STOP AND logging off in codesys, then i can use the DALI configurator as wanted.  
there is fine traffic on TCP/6626

1. 753-647 is FW 24, upgraded the card, no difference.

2. Codesys 3.5.19 Patch 7

3. Libraries: WagoAppDALI 1.3.1.10, WagoSysKbusServices 2.0.2.3,  
WagoSysKbusTerminalControl 2.2.2.2

4. Firewall is turned off for now.

5. Tried to execute Daliconfigurator as /abmode , /csmode or standalone (i suspect that the params defines a REST API between the codesys for sync of data vars)

I know that the DALI configurator has some ways to communicate “standard Modbus”, “pfc200 modbus” and “mbx”, and the Configurator looks if the controller is a “PFC200” !! So is the Dali configurator not up to date with the PFC300, or am i overseeing some version mismatch?  
The Log from the Linux is just telling me this on the picture, not what is causing trouble 😉 ?  
 ![image](https://us1.discourse-cdn.com/flex016/uploads/wago/original/2X/1/1f5ee5ea0a66212e532be6ebd7eeccd169eb95d5.png)

---

<div class="post-metadata">

**Author:** ![Faerch](https://avatars.discourse-cdn.com/v4/letter/f/8e7dd6/32.png) [@Faerch](https://www.wago.community/u/Faerch)\
**Post date:** [July 17, 2025, 2:06pm UTC](https://www.wago.community/t/terminal-specific-control-mode-fails-on-pfc300-8302-with-dali-configurator-4/1893/2 "2025-07-17T14:06:52Z")

</div>

**UPDATE** WAGO has answered, that this issue will be fixed in the next firmware for PFC300. until they made a IPK to install on the PFC300, that will fix this, im currently awaiting this IPK to test.