# Terminating resistor of 120 Ω **URL:** \ **Category:** Hardware and Linux\ **Tags:** pfc200\ **Created:** [September 3, 2026, 1:46pm UTC](https://www.wago.community/t/terminating-resistor-of-120/2866 "2026-09-03T13:46:54Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![damienexail](https://avatars.discourse-cdn.com/v4/letter/d/b2d939/32.png) [@damienexail](https://www.wago.community/u/damienexail)\ **Post date:** [September 3, 2026, 1:46pm UTC](https://www.wago.community/t/terminating-resistor-of-120/2866/1 "2026-09-03T13:46:54Z")
Hello, I use a lot of 750-658 Can card or 750-652 RS com card in XTR version. I’ve never found a sturdy, small, industrial-grade 120-ohm resistor that can be mounted directly on the card I’m looking for resistors that don’t stand out when you open the electrical cabinet. Any idea? Regards ---
**Author:** ![AdamReeve](https://sea2.discourse-cdn.com/flex016/user_avatar/www.wago.community/adamreeve/32/59_2.png) [@AdamReeve](https://www.wago.community/u/AdamReeve)\ **Post date:** [September 4, 2026, 1:22pm UTC](https://www.wago.community/t/terminating-resistor-of-120/2866/2 "2026-09-04T13:22:54Z")
WAGO has empty component housings that will plug into standard terminal blocks. You can insert a resistor into the housing and then push it into place in the terminal block inside your cabinet. > **[Empty component plug housing (2002-810) | WAGO](https://www.wago.com/global/rail-mount-terminal-blocks/empty-component-plug-housing/p/2002-810)** > > Empty component plug housing; 10.4 mm wide; 2-pole; Type 2; gray (4045454857776) | WAGO ---
**Author:** ![damienexail](https://avatars.discourse-cdn.com/v4/letter/d/b2d939/32.png) [@damienexail](https://www.wago.community/u/damienexail)\ **Post date:** [September 4, 2026, 1:35pm UTC](https://www.wago.community/t/terminating-resistor-of-120/2866/3 "2026-09-04T13:35:56Z")
Thanks Adam. It is a good idea