# Updated /etc/WAGO\_LOGIN **URL:** \ **Category:** Partner Technology\ **Created:** [April 28, 2024, 6:33pm UTC](https://www.wago.community/t/updated-etc-wago-login/907 "2024-04-28T18:33:26Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![espenbo](https://avatars.discourse-cdn.com/v4/letter/e/c57346/32.png) [@espenbo](https://www.wago.community/u/espenbo)\ **Post date:** [April 28, 2024, 6:33pm UTC](https://www.wago.community/t/updated-etc-wago-login/907/1 "2024-04-28T18:33:26Z")
I got a little bored with the error messages in /etc/WAGO\_LOGIN dmidecode and ifconfig not found. So I’ve updated it a bit. If Wago wants to use it, please do it. ```auto #!/bin/sh # Check for screenfetch and run it if present if command -v screenfetch >/dev/null 2>&1; then screenfetch fi # Check and fetch system version if [-f "/sys/class/dmi/id/product_version"]; then VERSION=$(cat /sys/class/dmi/id/product_version) else VERSION="Version not found" fi # Fetch IP addresses IP_LAN1=$(ip -f inet addr show X1 2>/dev/null | grep -oP 'inet \K[\d.]+') IP_LAN2=$(ip -f inet addr show X2 2>/dev/null | grep -oP 'inet \K[\d.]+') TAILSCALE=$(ip -f inet addr show tailscale0 2>/dev/null | grep -oP 'inet \K[\d.]+') # Gateway, DNS, and NTP information GATEWAY=$(ip route | grep default | awk '{print $3}') DNS=$(grep "nameserver" /etc/resolv.conf | awk '{print $2}') NTP_STATUS=$(timedatectl status | grep "NTP service" | awk '{print $3}') HOSTNAME=$(hostname -f) # Display ASCII Art Banner and other information echo "\033[1;32m ██ ██ █████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ █ ██ ███████ ██ ███ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ███ ███ ██ ██ ██████ ██████ \033[0m" if ["${VERSION}" != "Version not found"]; then echo "Product-Info: ${VERSION}" fi # Display URLs with IP check and conditional Tailscale IP display echo " Cockpit console: https://${HOSTNAME}:9090/$( [-n "${IP_LAN1}"] && echo " or https://${IP_LAN1}:9090/") Portainer console: https://${HOSTNAME}:9443/$( [-n "${IP_LAN2}"] && echo " or https://${IP_LAN2}:9443/") X1: ${IP_LAN1} X2: ${IP_LAN2}" [-n "${TAILSCALE}"] && echo " Tailscale: ${TAILSCALE}" echo " Default Gateway: ${GATEWAY} DNS Server: ${DNS} NTP Service: ${NTP_STATUS}" ``` ---
**Author:** ![espenbo](https://avatars.discourse-cdn.com/v4/letter/e/c57346/32.png) [@espenbo](https://www.wago.community/u/espenbo)\ **Post date:** [April 28, 2024, 10:25pm UTC](https://www.wago.community/t/updated-etc-wago-login/907/2 "2024-04-28T22:25:43Z")
A other version ```auto #!/bin/bash # Initialize service status variables COCKPIT_ACTIVE="inactive" PORTAINER_ACTIVE="inactive" ISSUE_FILE_COCKPIT="/etc/issue.d/cockpit.issue" # Ensure this path is correct # Check for screenfetch and run it if present if command -v screenfetch >/dev/null 2>&1; then screenfetch fi # Check and fetch system version VERSION=$(cat /sys/class/dmi/id/product_version 2>/dev/null || echo "Version not found") # Display ASCII Art Banner and other information echo -e "\033[1;32m ================================================ \033[0m" echo -e "\033[1;32m ██ ██ █████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ █ ██ ███████ ██ ███ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ███ ███ ██ ██ ██████ ██████ \033[0m" echo -e "\033[1;32m ================================================ \033[0m" # List all network interfaces except lo and those without an IP or with only local IPs echo -e "Available network interfaces and their IPs:" echo "===========================================" for iface in $(ip -o link show | awk -F ': ' '{print $2}' | cut -d' ' -f1); do # Fetch IP address, exclude empty, localhost, and virtual interfaces like veth*, docker*, etc. ip=$(ip -f inet addr show $iface 2>/dev/null | grep -oP 'inet \K[\d.]+') if [[-n "$ip" && "$iface" != "lo" && ! "$iface" =~ ^(docker|veth|br-).*]]; then echo -e " $iface: \033[1;37m$ip\033[0m" # IP addresses displayed in white fi done echo "===========================================" echo " " # Check for Cockpit service status if [-f "$ISSUE_FILE_COCKPIT"]; then echo "Cockpit is installed." COCKPIT_ACTIVE="active" # Read and display the URL from the issue file echo "Reading web console URL from $ISSUE_FILE_COCKPIT:" cat "$ISSUE_FILE_COCKPIT" else echo "Cockpit is not installed." COCKPIT_ACTIVE="not installed" fi echo -e "Cockpit Status: \033[1;32m$COCKPIT_ACTIVE\033[0m" ["$COCKPIT_ACTIVE" = "active"] && echo "Cockpit console: https://${HOSTNAME}:9090/" echo " " # Check for Portainer service status using Docker if command -v docker >/dev/null 2>&1; then if docker info >/dev/null 2>&1; then if docker ps | grep -q portainer; then PORTAINER_ACTIVE="active" else PORTAINER_ACTIVE="inactive (Docker running but Portainer not found)" fi else PORTAINER_ACTIVE="Docker permission denied or not running" fi else PORTAINER_ACTIVE="Docker not installed" fi echo -e "Portainer Status: \033[1;32m$PORTAINER_ACTIVE\033[0m" ["$PORTAINER_ACTIVE" = "active"] && echo "Portainer console: https://${HOSTNAME}:9443/" # Check for ignition scada and run it if present if command -v /usr/local/bin/ignition/ignition.sh status >/dev/null 2>&1; then /usr/local/bin/ignition/ignition.sh status fi # Tailscale IP address TAILSCALE_IP=$(ip -f inet addr show tailscale0 2>/dev/null | grep -oP 'inet \K[\d.]+') # Gateway, DNS, and NTP information GATEWAY=$(ip route | grep default | awk '{print $3}') DNS=$(grep "nameserver" /etc/resolv.conf | awk '{print $2}' | xargs) NTP_STATUS=$(timedatectl status | grep "NTP service" | awk '{print $3}') HOSTNAME=$(hostname -f) # Display other information echo -e " =============================================== Product-Info: \033[1;37m$VERSION\033[0m Tailscale IP: \033[1;37m${TAILSCALE_IP:-Not available}\033[0m Default Gateway: \033[1;37m$GATEWAY\033[0m DNS Server: \033[1;37m$DNS\033[0m NTP Service: \033[1;37m$NTP_STATUS\033[0m =============================================== " ```