# WAGO I/O module faceplates for CODESYS Visu

**URL:** <https://www.wago.community/t/wago-i-o-module-faceplates-for-codesys-visu/1924>\
**Category:** Feature and Product Requests\
**Tags:** codesys\
**Created:** [June 6, 2025, 5:48am UTC](https://www.wago.community/t/wago-i-o-module-faceplates-for-codesys-visu/1924 "2025-06-06T05:48:11Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![AdamA](https://avatars.discourse-cdn.com/v4/letter/a/53a042/32.png) [@AdamA](https://www.wago.community/u/AdamA)\
**Post date:** [June 6, 2025, 5:48am UTC](https://www.wago.community/t/wago-i-o-module-faceplates-for-codesys-visu/1924/1 "2025-06-06T05:48:11Z")

</div>

Hello-  
I am working on my first CODESYS project and am looking for, and have yet to find, faceplates for the WAGO I/O modules that I can use in the visualization of a project. I want to show the status of discrete inputs and outputs. I started developing my own, but would rather not spend the time if they already exist.

Some other manufacturers have them for their respective HMI development software. I am hoping WAGO has already developed them, or possibly someone has done the deed and is willing to share.

Thank you in advance…

---

<div class="post-metadata">

**Author:** ![quenorha](https://sea2.discourse-cdn.com/flex016/user_avatar/www.wago.community/quenorha/32/429_2.png) [@quenorha](https://www.wago.community/u/quenorha)\
**Post date:** [June 6, 2025, 5:50am UTC](https://www.wago.community/t/wago-i-o-module-faceplates-for-codesys-visu/1924/2 "2025-06-06T05:50:31Z")

</div>

Are you talking about the image of I/O modules ?  
In this case you could use the image from WAGO I/O Check software.  
You’ll find a lot of module in this folder : C:\Program Files (x86)\WAGO Software\WAGO-IO-CHECK 3\Image\Terminal

 ![image](https://us1.discourse-cdn.com/flex016/uploads/wago/original/2X/2/2507ef9c3c85d9bf25a2c5bd86c6073497b4631d.png)

---

<div class="post-metadata">

**Author:** ![AdamA](https://avatars.discourse-cdn.com/v4/letter/a/53a042/32.png) [@AdamA](https://www.wago.community/u/AdamA)\
**Post date:** [June 7, 2025, 12:56am UTC](https://www.wago.community/t/wago-i-o-module-faceplates-for-codesys-visu/1924/3 "2025-06-07T00:56:49Z")

</div>

Thank you for your reply. I did find these images. I am planning on using similar. But what I am looking for is more dynamic.

For example, the 750-1405, which is a 16-point discrete input module. I would like to have the image on my visualization with 16 indicators that would show the actual status of the inputs.

I have done a test and I can make a visualization showing the module image with 16 custom status indicators. I then put into a library and installed onto a new project. This seemed to work, but is a lot of work and very time consuming.

I was hoping Wago (or someone else) already did the time consuming part.

Does this make sense or am I not explaining well.

Thank you

---

<div class="post-metadata">

**Author:** ![AdamA](https://avatars.discourse-cdn.com/v4/letter/a/53a042/32.png) [@AdamA](https://www.wago.community/u/AdamA)\
**Post date:** [June 9, 2025, 9:00pm UTC](https://www.wago.community/t/wago-i-o-module-faceplates-for-codesys-visu/1924/4 "2025-06-09T21:00:30Z")

</div>

This is an example of what I am looking for. The picture is of a 750-1405 discrete input module with16 channels.

 ![wago di sample](https://us1.discourse-cdn.com/flex016/uploads/wago/original/2X/f/fe8c49dc1e58f653c9b62e0f526e2af368314297.png)

Each “dot” is tied to the status of an input. The indicator can be square or circle. I also programmed it so there are 7 color options.

I can put a whole library of these together, but I was hoping it already existed.

Thank you again.