# Wago PFC 200 CANBUS J1939 manager **URL:** \ **Category:** CODESYS\ **Tags:** pfc200\ **Created:** [June 7, 2025, 7:33pm UTC](https://www.wago.community/t/wago-pfc-200-canbus-j1939-manager/1931 "2025-06-07T19:33:51Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Abdullah](https://avatars.discourse-cdn.com/v4/letter/a/aeb1de/32.png) [@Abdullah](https://www.wago.community/u/Abdullah)\ **Post date:** [June 7, 2025, 7:33pm UTC](https://www.wago.community/t/wago-pfc-200-canbus-j1939-manager/1931/1 "2025-06-07T19:33:51Z")
Hello there I am new to WAGO , I am using WAGO PFC 200 750-8216 My problem is that I couldn’t add a j1939 manager to my project, is this problem solvable , did I do something wrong during installation of wago library in codsys , or the j1939 manager is not supported in WAGO with CODESYS. ---
**Author:** ![WagoTorgeir](https://sea2.discourse-cdn.com/flex016/user_avatar/www.wago.community/wagotorgeir/32/78_2.png) [@WagoTorgeir](https://www.wago.community/u/WagoTorgeir)\ **Post date:** [June 8, 2025, 3:44pm UTC](https://www.wago.community/t/wago-pfc-200-canbus-j1939-manager/1931/2 "2025-06-08T15:44:17Z")
The CoDeSysRuntime in Wago devices does not yet support the graphical configurator for CAN-J1939. However, as an alternativ the corresponding functionality can be implemented via the WagoAppCanLayer2-library, e.g. using the following template project: [https://wago.sharepoint.com/:u:/s/O\_36\_Customer\_Downloads/EZbmOQCVn6ZFojODSiGdChAB4b7nNE1qIMKiAkUx2jvjeQ?e=8XYu27](https://wago.sharepoint.com/:u:/s/O_36_Customer_Downloads/EZbmOQCVn6ZFojODSiGdChAB4b7nNE1qIMKiAkUx2jvjeQ?e=8XYu27) ---
**Author:** ![Abdullah](https://avatars.discourse-cdn.com/v4/letter/a/aeb1de/32.png) [@Abdullah](https://www.wago.community/u/Abdullah)\ **Post date:** [June 13, 2025, 6:30pm UTC](https://www.wago.community/t/wago-pfc-200-canbus-j1939-manager/1931/3 "2025-06-13T18:30:48Z")
Thanks, that was really helpful. I was confused before if I was messing something, now it is clear