# Wireguard for PFC

**URL:** <https://www.wago.community/t/wireguard-for-pfc/1331>\
**Category:** Hardware and Linux\
**Tags:** linux\
**Created:** [November 15, 2024, 3:07pm UTC](https://www.wago.community/t/wireguard-for-pfc/1331 "2024-11-15T15:07:08Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![MikePsaltis](https://sea2.discourse-cdn.com/flex016/user_avatar/www.wago.community/mikepsaltis/32/47_2.png) [@MikePsaltis](https://www.wago.community/u/MikePsaltis)\
**Post date:** [November 15, 2024, 4:09pm UTC](https://www.wago.community/t/wireguard-for-pfc/1331/2 "2024-11-15T16:09:32Z")

</div>

Hello,

I have not tried Wireguard, but have had success with ZeroTier. In my experience is faster, and more simple to configure than OpenVPN. I have also seen others use Tailscale on a PFC200.

> [@How To: Use ZeroTier on Wago Controllers](https://www.wago.community/t/how-to-use-zerotier-on-wago-controllers/529):
>
> This write-up shows how to leverage ZeroTier VPN service on a Wago Controller. We do this by creating a Docker Container to run ZeroTier. This can also be installed on a PC to create a connection between the controller and your PC for remote programming and troubleshooting.

> [@Tailscale running on controller](https://www.wago.community/t/tailscale-running-on-controller/796/2):
>
> Hi, I’ve successfully used it on a PFC. Here is the command I used for installation : docker run -d --name=tailscaled --restart unless-stopped -v /var/lib:/var/lib -v /var/lib/tailscale:/var/lib/tailscale -e TS\_STATE\_DIR=/var/lib/tailscale -v /dev/net/tun:/dev/net/tun -e TS\_USERSPACE=0 --network=host --cap-add=NET\_ADMIN --cap-add=NET\_RAW tailscale/tailscale After you check the status and get the URL to connect it to your tailscale account : docker exec tailscaled tailscale --socket /tmp/t…

---

_[View the full topic](https://www.wago.community/t/wireguard-for-pfc/1331)._