How can we get a Communication failure status from the connected 3rd party Bacnet IP device in PFC200 controller.Its a Gateway application on PFC200 to read data from BACnet device and send it to SCADA over Modbus TCP. Customer require a Communication failure status of the connected Bacnet Device. …

When you create the Client Mapping in the BACnet Configurator, be sure to enable the “Connection Monitoring” option for each Client Mapping element. You must then also export the controller object as size Medium or Large back to Codesys. If enabled (and utilizing a Medium or Large object model), the…

Get BACnet device Communication failure status

CODESYS

AdamReeve February 25, 2025, 6:08pm 3

See here for a How To guide:

3 Likes

Topic		Replies	Views
PFC200 with 750-658 CAN Gateway - Unresponsive CODESYS pfc200 , codesys	5	593	December 19, 2024
BC100, Codesys cannot find with IO Fault CODESYS	3	136	September 25, 2024
Cannot connect bc100 codesys Hardware and Linux codesys	3	115	March 17, 2025
BACnet Configurator issues with multi-controller (PFC200) CODESYS v3 application CODESYS pfc200	0	233	February 1, 2024
PFC200 IO Fault to Ignition Tag CODESYS	0	36	May 21, 2025

Get BACnet device Communication failure status

Related topics